Why do we need steel building accessories?

The components or parts are usually connected by welds, bolts or rivets. Because of its light weight and simple construction, it is widely used in large factories, venues, super high-rise buildings and other fields. The steel structure is easy to rust. Generally, the steel building accessories shall be derusted, galvanized or coated, and shall be maintained regularly.

What should I pay attention to in daily use of Steel building accessories?

For maintenance personnel, the daily maintenance of steel building accessories should first be the maintenance of the surface coating of the components. The maintenance of the coating directly affects the service life of the steel structure. Therefore, to do a good job in daily maintenance, you should start with the following points:

1. The surface of the steel structure must be kept clean and dry, and the places where the steel structure is easy to accumulate dust (such as the steel column foot and the gusset plate) should be cleaned regularly.

2. Regularly check the integrity of the protective coating of Steel building accessories. If one of the following occurs, it should be maintained in time:

1) It is found that the area of the coating surface loses its luster to 90%;

2) The area of roughness, weathering and dry cracking of the coating surface reaches 25%;

3) The paint film bulges in the coating and the slightly rusted area of the components reaches 40%;

3. The steel structure parts affected by high temperature and high temperature should be equipped with protective plates to protect the coating from high temperature damage.

4. Try to avoid contact of steel building accessories with corrosive substances, and clean up those that have been in contact.

What should be prepared before the construction of steel building accessories?

1. According to the principles of production applicability, reliable performance, safe use, and convenient operation, a variety of steel building accessories should be selected reasonably.

2. The inspection and measurement equipment should ensure the unity, accuracy and reliability of the value transmission. Various measuring tools such as steel tape, board, square, level, spring force gauge and so on used in the construction shall be verified before storage to ensure that the measuring instruments entering the construction site are qualified. The tools used in the construction shall be checked regularly . Ensure that each tool always meets the measurement accuracy requirements in the same project.

What should I pay attention to when using steel building accessories?

Steel building accessories must weld the cracks between the two drill holes. During welding, the edges of the cracks can be gas-cut into different types of grooves according to the thickness of the component to ensure the quality of the welding. When the thickness is less than 6mm, use 1 shape (that is, without beveling); when the thickness is greater than 6mm and less than 14mm, use the V-shaped bevel; when the thickness is greater than 14mm, you need to use the X-shaped bevel.

As technology advances, steel building accessories are increasingly used in everyday life. Qingdao Xinguangzheng Steel Structure Co., Ltd. is known for high precision steel building accessories. And you can connect them.